Frequently Asked Questions

To make sure they adhere to the minimal legal requirements, tread thicknesses must be examined. According to the recommended pressures specified by the vehicle's manufacturer or Yokohama Club Network, pressures should be monitored. As advised by the car manufacturer, raise the pressure if the vehicle is severely loaded. A complete detailed examination of the wheels should be performed as well to check for any cracks, bumps, or bulges. Look for any materials that may be stuck in the treads and need to be taken out as well.

Since the tread pattern serves to eliminate water from between the tyre and the road surface, enough tread depth is necessary for optimal traction on wet roads. Riders having inadequate tyre pressure suffer a higher risk of aquaplaning, less grip, and longer braking distance.

Your vehicle must have the proper tyre pressure in order to drive safely. Low or over-inflated tyres will have worse stability and grip, which could lead to unexpected or abnormal car performance. Inadequately inflated tyres are also more susceptible to abrupt, deflation and wear out their outer edges rapidly. Impact damage will be more likely to affect the wheel rim and tyre. An unpleasant ride decreased grip during the day due to a smaller area of contact with the road, and faster tread centre wear is all effects of over-inflation. Lower operating expenses and increased tyre lifespan are two advantages of properly inflated tyres.

This information can also be found within the fuel tank lid or operator's door sill, as well as in the vehicle manufacturer's manual. This info will also be available from numerous Yokohama Club Network tyre dealers.

Numerous things might lead to irregular wear. The frequent rubbing of tyres on curbs, poor steering alignment, reckless driving, over-or under-inflation of tyres, and worn chassis components are just a few causes. There really is no single solution since there are too many factors. Tires should be routinely inspected by Yokohama Club Network Professionals or any knowledgable person for wear indicators and replaced as necessary.

The way they are used has a big impact on tyre life. When compared to tyres that are poorly maintained and mistreated in city centres and urban environments, a set of tyres that are only utilised on motorways might deliver a significantly higher mileage.

Drivers should always reference the owner's manual of their automobile maker or Yokohama Club Network’s website for information on the speed and distance that can be driven. Recommendations in the region may vary from one tyre manufacturer to the next. Please be aware that running regular tyres without pressure will result in permanent damage.

Snow tires are specifically made to handle snow and ice as well as chilly and rainy weather. The tread composition in typical tyres starts to harden below 7 degrees Celsius, reducing grip. Modern silica compounds are used in winter tyres to keep them flexible in cold weather, increasing traction and reducing stopping distances. They also include tread patterns that were specifically created to provide better traction on icy roads.

All new car tyre labels starting in November 2012 will include three essential measurements that rank the tyre's fuel efficiency, wet braking capability, and outside noise emission qualities. Drivers will be able to make more informed decisions about safer and ecologically friendly driving thanks to the labels, which will help them understand how tyres perform in these three critical areas.

The greatest alternative is to install all four tyres at once, but if that is not possible, the next best thing is to install two tyres at a time, in pairs, to provide the best handling and traction on each wheel. Then, as the last option, one tyre can be changed. Under no conditions should you replace any tyres without first consulting a knowledgeable tyre retailer.

On slick surfaces, new tyres on the back axle improve driver control. This is due to the fact that tyres with deeper treads perform better at removing water and provide higher traction. The car is more prone to oversteer, which is considerably harder to control than understeer if the new tyres are mounted on the front of the vehicle. Understeer occurs when the front of the car slips, and oversteer occurs when the rear slides.